Drain Clog Remover Tool, Sink Cleaner, Bathroom Tub Drain Snake

The drain auger, measuring 39 inches in length, is long enough to reach deep into sink pipes. With a quantity of 6+1, the product comes with various packing specifications: 3 packs of 20-inch sink snake hair removal tools, 1 pack of 39-inch blue-handled drain auger, and 2 packs of 24-inch drain cleaner sticks for hair clog removal.

Made of stainless steel and durable PP plastics, the materials ensure safety and good toughness. The instructions for use, accompanied by practical operation pictures, demonstrate the functionality of these products.

The stainless steel drain auger with a blue handle boasts an extended length, allowing it to delve deeper into the pipeline. Its unique design can effectively grab and remove accumulated hair, food, garbage, and other obstructions. The slightly convex center of the sealing plug, coupled with the 8MM grid mesh, facilitates unimpeded water flow and prevents the pipeline sewer from becoming blocked.

The step-by-step usage guide for the drain sink snake with four-claw is as follows: 1) Gently insert the opposite end into the clogged sink/drain/pipe, pausing when it touches the clogs; 2) Pull back 1-1.5 inches, then press the handle end to open the claw and grab the blockages; 3) Slowly draw the tool back until the blockages are removed; 4) Repeat steps 1-3 until no more blockages are caught.

For the plastic drain plumbing and drain auger with a blue handle, the usage instructions are: 1) Hold the handle and insert the other end into the clogged drain, rotating and lifting it several times; 2) Pull it out and clean any wrapped hair or clogs; 3) Repeat steps 1-2 until no hair or clogs are caught.

It's important to note the following precautions: 1) Ensure the sink's width is larger than 0.48 inches before purchasing; 2) Avoid using the tool immediately after applying chemical drain cleaners; 3) Keep it out of reach of children; 4) Wear work gloves and masks to protect your hands; 5) Remove the drain filter or sink plug before use; 6) Do not twist or pull too hard to prevent breakage or jamming.

The plastic hair drain clog remover tool is used as follows: 1) Slowly plug the pointed part into the sink until near the handle; 2) Hold the handle loop and pull it up and down, rotating a few times; 3) If you feel blockages on the hook, lift it up slowly; 4) Discard the removed debris.

For the stainless steel drain cleaner sticks, the usage instructions are: 1) Slowly plug the claw part into the sink; 2) Hold the handle, press the spring handle, and the claw will open and grip the rubbish; 3) Lift it up slowly and discard the removed debris.

These versatile cleaning tools can be applied in various locations, including toilets, drains, pipes, baths, kitchen sinks, and washbasins, saving you the need for expensive plumber services.

product information: